Frequently Asked Questions

What is Xenon light?

The xenon bulb is a micro discharge bulb filled with a mixture of noble gases including Xenon. The bulb has no filament as is the case with a halogen lamp. The light is created by striking an arc between 2 electrodes. The xenon lamp needs a starter for quick ignition and an electronic ballast to function properly.

What are the advantages of Kelvin® HID's over traditional halogen bulbs?

More Light Output

A 35-Watt Xenon H.I.D. lamp produces up to 3x the lumens of light source when compared to a 55-Watt halogen bulb.

Whiter Light

While the halogen light appears yellow-ish, the HID lighting system produces a light that is closer to that of natural sunlight.

Increased Visibility

In most night time driving and/or bad weather situations, this combination of a whiter color and a greater light output allows for a safer and more illuminated drive. The light output spread is far more then compared to a regular stock halogen bulb.

Reduced Power Consumption

HID lamp systems draw significantly less power from your vehicle's electrical system.

Greater Product Life

HID lamp systems are designed to outlast your vehicle. On average, these bulbs will last 3-5 times longer than a traditional halogen bulb.

Distinctiveness

Your vehicle will not only have the latest in automotive lighting technologies, but also have that unique eye-catching appeal. Currently, only high-end vehicles offer this Xenon H.I.D. lighting systems.

Can I re-install the original halogen bulbs after the HID kit has been installed?

With the growing popularity of leasing vehicles, a big concern is whether or not you can bring the vehicle back to its original factory condition. Our kits install with little or no modifications to your vehicle. If need be, the entire kit can be removed and the original halogen bulbs can be replaced. This kit can be re-installed into another vehicle that uses the same bulb size.

For anyone who is mechanically inclined, this installation is considered do-it-yourself. While a typical installation takes approximately an hour, it can vary depending on application (conversion or auxiliary). Our kits are ready to install right-out-of-the-box and come complete with everything that you will need. We also provide you a full set of easy-to-read, step-by-step instructions to guide you.

Yes, HID conversion kits will fit cars with angel eyes. However, we do recommend that the kit be installed by a professional.

Why can I not just replace the halogen bulb in my vehicle with HID lamps without having to purchase the entire kit?

Motorcycles and automobiles currently use a 12 Volt electrical system for their headlamps. H.I.D. lighting systems require over 20,000 volts to ignite the bulbs. Once lit, they only require 12 volts to keep running. Our kits include a power pack that is necessary for the lamps to turn on. The input of the power pack is 12 volts. It is an integral part of the system.

HID lamps are designed to last for the life of your vehicle. They will run for approx 3000 hours. Our lamp kits and bulbs are made of the finest materials available.

The car over the last decade has been made safer and more comfortable with the introduction of such technologies as ABS, airbags and air-conditioning. However 60% of all accidents take place in the dark. Therefore vehicle lighting plays a very big role in road safety. It is a fact that a 60 year old requires 10-11 times the amount of light to perform the same functions as a 20 year old. With the increase in the average age of the population more light is required to drive safely.

Every country and jurisdiction has its own rules and regulations governing the use of automotive lighting. Xenon H.I.D. lighting systems that are supplied with the vehicles from the factory are DOT / E approved. The same OEM manufacturers that supply all the major car companies of the world also make our kits. NO XENON H.I.D. lighting system available from ANY source is DOT / E approved if installed outside of the factory. These kits are not street legal for use on public roads as they are. As a result, we officially endorse the kit for exhibition and off-road use and will only sell the kit to be used for these purposes. We are not responsible for customers who violate the terms of sale in which they will assume all responsibilities for any unauthorized or unintended use other than exhibition or off-road use.

Florida Custom Tinting recommends the installation be done by a professional if you have no experience working with cars. Most vehicles are a fairly simple do-it-yourself plug & play installation, but there are certain vehicles that are more difficult. If you are local or located near the Orlando, Florida area, you can call us to set up an installation appointment.

phone: 407-699-5152